Long Distance Transmission Video no Delay. Make HD as Fast as You Can Imagine. Robust yet stylish Vandal Resistant Bullet camera offering superb HD image quality, with a built-in Infra-Red night vision range of up-to 25 meters.
The World in your view. This is a New Technology on CCTV Products AHD CCTV Cameras gave you High Definition images and nearly 5 times better than the Analogue camera. The CASPERi delivers HD 1080p resolution for one of the best in class viewing experiences. This even has you covered in the dark by providing clear night time video recording. It can be installed anywhere around your home shop office as it is durable, weatherproof, and night vision capable. The CASPERi is compatible with 1080p Full HD Video Security Systems.
The DCG-2MP-BL dome is a 4-in-1 HD infrared surveillance camera that supports the following video formats: AHD, HD-TVI, HDCVI, and analog CCTV (CVBS). The AHD, HD-TVI, and HDCVI video modes support 2 megapixel / 1080p resolution (1920 x 1080). The analog CCTV mode supports 960H resolution (960 x 480). Installers can easily select the video mode using the small joystick that is attached to the camera’s video cable. The 3.6mm lens captures a 90 degree field of view.
The DCG-2MP-BL is a white dome camera that is enclosed in an IP65 weatherproof housing. The 24 infrared LEDs that are built-in allow the camera to capture video in normal, low light and zero light conditions. The IR distance is rated up to 25 meters / 82 feet. This camera allows installers to ceiling mount the camera and adjust the angle of view in any direction.
This camera is typically connected to a surveillance DVR by hard wiring it using the same BNC cable that is used for analog CCTV cameras.
2 Megapixel Image Sensor
1080p HD Video Resolution (1920 x 1080)
960H Resolution in CVBS Mode
AHD, HD-TVI, HDCVI, and Analog CCTV (CVBS) modes
Switchable PAL and NTSC Video Standards
Zero Light Infrared Night Vision
24 Pieces Infrared LEDs / 82 foot IR Distance
3.6mm Fixed Lens / 90 Degree View
IP65 Weatherproof Housing
OSD Controls via Cable / Joystick
12V DC Power Supply
Video Format Control
To switch between Analog, AHD, CVI, and TVI, please follow the instructions below.
AHD Mode: Hold the UP button on the OSD for 5 seconds.
CVI Mode: Hold the DOWN button on the OSD for 5 seconds.
TVI Mode: Hold the LEFT button on the OSD for 5 seconds.
CVBS / Analog Mode: Hold the RIGHT button on the OSD for 5 seconds.